What to do if Delta Servo Drives show Encoder temperature exceeds the protective range?
If your Delta Servo Drives are showing that the encoder temperature exceeds the protective range, above 105?, improve heat dissipation or reduce the loading of operation.
What to do if Delta Servo Drives show Communication of linear scale is breakdown?
If your Delta Servo Drives are showing that the communication of linear scale is breakdown, check the communication of linear scale again.
What to do if Delta ASD-A2-4523 show Analog input voltage error?
If your Delta Servo Drives are showing an analog input voltage error because the analog input voltage is higher than the value of P1-83, check all analog input voltages.
What to do if Delta ASD-A2-4523 Servo Drives show Warning of servo drive function overload?
If your Delta Servo Drives are showing a warning of servo drive function overload, set P2-66 Bit4 to 1 and then re-power on the servo drive.
What to do if Delta ASD-A2-4523 Servo Drives show Wrong setting of E-gear ratio?
If your Delta Servo Drives are showing the wrong setting of E-gear ratio because setting of E-gear ratio is wrong when power on the servo drive, modify the range of E-gear ratio and repower on the servo drive.
What to do if Delta ASD-A2-4523 Servo Drives show The absolute position is lost?
If your Delta Servo Drives are showing that the absolute position is lost because of battery undervoltage, after change the battery, conduct homing procedure again.
What to do if Delta Servo Drives show The multi-turn of absolute encoder overflows?
If your Delta Servo Drives are showing that the multi-turn of absolute encoder overflows because the operation distance exceeds the range the absolute encoder is able to record, conduct homing procedure again.
What to do if Delta ASD-A2-4523 show Encoder temperature warning?
If your Delta Servo Drives are showing an encoder temperature warning because encoder temperature exceeds the warning level (but it is still within the protective range85 ~100?), improve heat dissipation or reduce the loading of operation.
How to fix absolute data transmitted via I/O is in error in Delta ASD-A2-4523?
If your Delta Servo Drives are showing that absolute data transmitted via I/O is in error because of sequence error, correct the reading sequence of I/O.
What to do if Delta ASD-A2-4523 Servo Drives show Wrong motor type?
If your Delta Servo Drives are showing the wrong motor type because incremental motor is not allowed to activate the absolute function, if the user desires to use absolute function, please choose absolute motor.
General| Brand | Delta |
|---|---|
| Model | ASD-A2-4523 Series |
| Category | Servo Drives |
| Language | English |
To Next Page
