To Next PageTo Next PageWhat to do if my Delta Servo Drives motor is overheating?
If your Delta Servo Drives motor is overheating, check the mounting surface for flatness and any obstructions like paint or gaskets that could impair heat dissipation between the motor and the mounting surface. Remove any such objects. You can also use methods to improve heat dissipation, such as forced air cooling.
Why is my Delta Servo Drives motor making abnormal noise?
Abnormal noise from a Delta Servo Drives motor can stem from a vibration source in the connecting component, such as the coupling. Consider replacing the connecting component or contacting the manufacturer. Alternatively, the encoder might be experiencing excessive vibration or shocks, in which case you should replace the servo motor.
General| Brand | Delta |
|---|---|
| Model | ASD-B2-0221-B |
| Category | Controller |
| Language | English |
Details of the servo drive's connectors, their signals, and terminal functions.
Methods for estimating load inertia and performing auto, semi-auto, or manual tuning.
Details on how to configure and use the servo drive in position control mode.
Configuration and operation of the servo drive in speed control mode.
List of servo drive alarms, their descriptions, and corresponding DO/Servo Status.
Detailed troubleshooting guide for common servo drive alarms and their causes/solutions.
