To Next Page
K
Kevin LloydAug 15, 2025
What to do if the external voltage is abnormal in Delta Control Unit?
- CChristopher MorrisAug 15, 2025
If the external voltage is abnormal in the Delta Control Unit, check the external power supply.
What to do if the external voltage is abnormal in Delta Control Unit?
If the external voltage is abnormal in the Delta Control Unit, check the external power supply.
What to do if signal on channel 0 exceeds input range on Delta Control Unit?
If the signal received by channel 0 exceeds the range of inputs which can be received by the hardware, check the input signal level for channel 0.
What to do if signal on channel 1 exceeds input range on Delta Control Unit?
If the signal received by channel 1 exceeds the range of inputs which can be received by the hardware, check the input signal level for channel 1.
What to do if signal on channel 2 exceeds input range on Delta Control Unit?
If the signal received by channel 2 exceeds the range of inputs which can be received by the hardware, check the input signal level for channel 2.
What to do if signal on channel 3 exceeds input range on Delta Control Unit?
If the signal received by channel 3 exceeds the range of inputs which can be received by the hardware, check the input signal level for channel 3.
What to do if signal on channel 4 exceeds input range on Delta Control Unit?
If the signal received by channel 4 exceeds the range of inputs which can be received by the hardware, check the input signal level for channel 4.
What to do if signal on channel 5 exceeds input range on Delta Control Unit?
If the signal received by channel 5 exceeds the range of inputs which can be received by the hardware, check the input signal level for channel 5.
What to do if signal on channel 6 exceeds input range on Delta Control Unit?
If the signal received by channel 6 exceeds the range of inputs which can be received by the hardware, check the input signal level for channel 6.
What to do if signal on channel 7 exceeds input range on Delta Control Unit?
If the signal received by channel 7 exceeds the range of inputs which can be received by the hardware, check the input signal level for channel 7.
General| Brand | Delta |
|---|---|
| Model | AH500 |
| Category | Controller |
| Language | English |
Introduces the usage of special modules: Analog input/output, temperature measurement, motion control, and network modules.
Details electrical, EMC, and environmental specifications for the AH500 module.
Provides general operating temperature, humidity, storage, vibration/shock resistance, and work environment specifications.
Outlines EMI and EMS standards including enclosure port, AC power port, electrostatic discharge, and radio frequency field.
Details electrical specifications, functions like channel enabling/disabling, calibration, averaging, scale range, and disconnection detection.
Provides electrical specifications including number of inputs, conversion, supply voltage, connector type, conversion time, and isolation.
Guides on installing the module into a slot, tightening the screw, and installing the removable terminal block.
Introduces the AH10/15SCM-5A serial communication module and its support for Modbus, UD Link, BACnet, and RS-485/RS-422/RS-232 protocols.
Presents the physical dimensions and profiles of AH10SCM-5A and AH15SCM-5A modules, including component identification.
Provides the physical dimensions (length, width, height) of the AH10SCM-5A and AH15SCM-5A modules in mm.
Details the steps for installing the module into a slot and connecting the wiring, ensuring proper backplane installation and screw tightening.
Introduces the AH10/15EN-5A Ethernet module for transmitting data via Ethernet, controlling remote devices, and downloading programs.
Details specifications for network interface, communication protocols, and electrical requirements of the AH10/15EN-5A.
Describes the RJ-45 connector type, transmission interface standards, cable category, and auto-detection of transmission speed.
Guides users on configuring the module via ISPSoft, including hardware, network, and intelligent module settings.
Explains setting IP addresses, subnet masks, and default gateways for network devices, and configuring IP filters and TCP keepalive period.
Introduces the AH10DNET-5A as a DeviceNet master or slave module for connecting AH500 series CPU modules.
Details DeviceNet interface, electrical specifications, environment resistance, and product profile including dimensions and parts.
Provides the profile and mechanical dimensions of the AH10DNET-5A module.
Guides on installing the AH10DNET-5A module onto the backplane and connecting the DeviceNet communication connector.
Step-by-step instructions for physically installing the AH10DNET-5A module onto the backplane rack.
Introduces the AHRTU-DNET-5A as a remote I/O module for DeviceNet, used with AH500 series modules.
Details the procedure for installing the AHRTU-DNET-5A module onto the rack, including connecting cables and setting up.
Provides instructions on how to physically install the AHRTU-DNET-5A module into the CPU slot of the main rack.
Introduces the AH10PFBM-5A as a PROFIBUS DP master module for AH500 series PLCs.
Details PROFIBUS DP port interface, communication parameters, electrical specifications, and environmental conditions.
Defines the pin assignments and specifications for the PROFIBUS DP DB9 connector.
Guides on installing the AH10PFBM-5A module and CPU module to the main rack and connecting the PROFIBUS DP connector.
Provides instructions for installing the AH10PFBM-5A module and CPU module onto the main rack.
Introduces the AH10PFBS-5A as a PROFIBUS DP slave module for connecting AH series I/O modules to the PROFIBUS DP network.
Details the installation process including dimensions, installing the module and CPU, and connecting the PROFIBUS-DP connector.
Provides instructions for installing the AH10PFBS-5A module and CPU module onto the main rack.
Guides on inserting and tightening the PROFIBUS-DP bus connector to the AH10PFBS-5A communication port.
Introduces the AHRTU-PFBS-5A as a PROFIBUS DP remote I/O communication module for connecting AH series I/O modules.
Details the installation process including dimensions, installing the module to the main rack, and connecting the PROFIBUS DP connector.
Provides instructions for installing the AHRTU-PFBS-5A module into the CPU slot of the main rack.
Describes how to configure the DeviceNet network using AH10PFBM as master and AHRTU-PFBS-5A as slave.
Illustrates the network topology for creating a PROFIBUS DP network with AH10PFBM and AHRTU-PFBS-5A.
Introduces the AH10COPM-5A module, forming CANopen master or slave stations with AH500 series CPU modules.
Details the installation process including inserting the module into a backplane and connecting the CANopen connector.
Provides step-by-step instructions for installing the AH10COPM-5A module into a backplane slot.
Explains how to set the AH10COPM-5A to Master or Slave mode using HWCONFIG in ISPSoft.
Guides users on selecting the Master or Slave mode for AH10COPM-5A via HWCONFIG and downloading the settings.
