Delta AH500 - I;O Mapping Relations between Master PLC CPU and Slave PLC CPU

Chapter 12 Network Module AH10PFBM
12-47
30. Return to the main interface of the software after downloading is completed.
(Note: After downloading is completed, the three indicators of the master are all green and the
digital display shows the node address of the master, which indicates that the network
communication is normal.)
12.6.5 I/O Mapping Relations between Master PLC CPU and
Slave PLC CPU
The following interface shows the starting addresses and lengths of the OUTPUT area and INPUT
area that PLC CPU assigns to the master module. The data in OUTPUT area are sent to the slave
and the INPUT area receives the data from the slave.