Delta AH500 - Rs-485;Rs232; Connecting to a Power Meter

Chapter 8 Serial Communication Module AH10/15SCM
8-47
8.7.3 RS-485/RS232
This section introduces how AH10/15SCM-5A is connected to other industrial products through a
non-Modbus RS-485/RS-232 communication port on AH10/15SCM-5A.
8.7.3.1 Connecting to a Power Meter
A power meter can be connected through Modbus, or through a RS-485/RS-232 port. This section
introduces how AH10/15SCM-5A is connected to a power meter through a UD Link RS-485/RS-232
port on AH10/15SCM-5A.
(1) Starting SCMSoft
Open HWCONFIG.COM1 SettingSet communication parameters.