Delta AH500 - Mapping Areas in AHRTU-PFBS-5 A; Configuration of AH10 PFBM-5 A Master in Hardware

Chapter 14 Remote I/O Communication Module AHRTU-PFBS
14-13
14.7 Mapping Areas in AHRTU-PFBS-5A
This section is going to describe the configuration of the PROFIBUS DP network and the data
mapping relationships by using AH10PFBM-5A as the master and AHRTU-PFBS-5A as the slave.
14.7.1 Configuration of AH10PFBM-5A Master in Hardware
As the PROFIBUS DP master module of AH series PLC, AH10PFBM-5A should be used with AH
CPU together. The hardware configuration of AH10PFBM-5A is conducted in the ISPSoft software
and the detailed configuration is shown below.
(Take the communication with the master PLC by means of USB as an example for explanation here.
For the usage and operation of ISPSoft, please refer to the user manual of ISPSof)
1. Open ISPSoft as below