Delta AH500 - AHRTU-DNET-5 A Status Setting Interface

Chapter 11 DeviceNet Remote I/O Module AHRTU-DNET
11-29
11.4.2.3 AHRTU-DNET-5A Status Setting Interface
After setting the mapping addresses of the I/O module devices is finished, the AHRTU-DNET-5A
configuration interface will be shown as follows.
On the AHRTU-DNET-5A configuration interface, double click left-side AHRTU-DNET-5A icon and
its status setting interface will pop up, which is used for setting the error treatment of
AHRTU-DNET-5A as below.