Delta AH500 - Hardware Configuration ─ IEC60870-5 Parameters; Intelligent Module Configuration ─ NTP

Chapter 9 Ethernet Communication Module AH10/15EN
9-27
 Input data parameters
Users can set an initial data register to which input data is transmitted, and the number of data
registers. 12288 data registers at most can be used.
 Output data parameters
Users can set an initial data register from which data is transmitted, and the number of data
registers. 12288 data registers at most can be used.
9.4.5 Hardware Configuration ─ IEC60870-5 Parameters
This setting is used for configuring the parameters used in IEC60870-5 for AH15EN-5A; the setting
range is 1s~255s.
 Common ASDU Address
The ASDU public address; default is 3.
 T1
Timeout of connection establishment; default is 15s.
 T2
Timeout for acknowledgements, if no data telegrams are transferred t
2
<t
1
; default is 10s.
 T3
Timeout for sent test telegrams in the event of long idle states; default is 20s.
9.4.6 Intelligent Module Configuration ─ NTP
Users can set the parameters related to time correction.