To Next PageTo Next PageWhat to do if my Delta Servo Drives motor is overheating?
If your Delta Servo Drives motor is overheating, check the mounting surface for flatness and any obstructions like paint or gaskets that could impair heat dissipation between the motor and the mounting surface. Remove any such objects. You can also use methods to improve heat dissipation, such as forced air cooling.
Why is my Delta Servo Drives motor making abnormal noise?
Abnormal noise from a Delta Servo Drives motor can stem from a vibration source in the connecting component, such as the coupling. Consider replacing the connecting component or contacting the manufacturer. Alternatively, the encoder might be experiencing excessive vibration or shocks, in which case you should replace the servo motor.
General| Brand | Delta |
|---|---|
| Model | ASD-B2-0421-B |
| Category | Controller |
| Language | English |
Critical safety guidelines for installation, operation, and maintenance of the servo drive.
Procedure for checking the servo drive and motor after purchase.
Matching servo drives with corresponding servo motors by specifications.
Recommended environmental conditions for servo drive and motor installation.
Wiring diagrams for different power supply types and models.
Details on the CN1 connector's terminals, signals, and diagrams.
Step-by-step guide for setting parameters via the drive's panel.
Detailed descriptions of specific parameters, their settings, and related sections.
List of servo drive alarms with descriptions and corresponding DO/Servo Status.
Troubleshooting guide for common alarm causes and their corrective actions.
Specific steps to clear alarms and restore normal operation.
