AH500 Module Manual
5-72
5.2.12 Troubleshooting
5.2.12.1 Error Codes
Error
Code
Type Description
RUN LED
indicator
LED
indicator
16#A600 Alarm Hardware failure OFF ON
The external voltage is abnormal.
16#A603 Alarm
The factory correction is abnormal.
OFF ON
16#A400 Alarm
The signal received by channel 0 exceeds the
range of inputs which can be received by the
hardware.
OFF ON
16#A401 Alarm
The signal received by channel 1 exceeds the
range of inputs which can be received by the
hardware.
OFF ON
16#A402 Alarm
The signal received by channel 2 exceeds the
range of inputs which can be received by the
hardware.
OFF ON
16#A403 Alarm
The signal received by channel 3 exceeds the
range of inputs which can be received by the
hardware.
OFF ON
16#A404 Alarm
The signal received by channel 4 exceeds the
range of inputs which can be received by the
hardware.
OFF ON
16#A405 Alarm
The signal received by channel 5 exceeds the
range of inputs which can be received by the
hardware.
OFF ON
16#A406 Alarm
The signal received by channel 7 exceeds the
range of inputs which can be received by the
hardware.
OFF ON
16#A407 Alarm
The signal received by channel 8 exceeds the
range of inputs which can be received by the
hardware.
OFF ON
16#A000 Warning
The signal received by channel 0 exceeds the
range of inputs which can be received by the
hardware.
ON Blink
16#A001 Warning
The signal received by channel 1 exceeds the
range of inputs which can be received by the
hardware.
ON Blink
16#A002 Warning
The signal received by channel 2 exceeds the
range of inputs which can be received by the
hardware.
ON Blink
16#A003 Warning
The signal received by channel 3 exceeds the
range of inputs which can be received by the
hardware.
ON Blink
16#A004 Warning
The signal received by channel 4 exceeds the
range of inputs which can be received by the
hardware.
ON Blink
16#A005 Warning
The signal received by channel 5 exceeds the
range of inputs which can be received by the
hardware.
ON Blink
To Next Page
Loading...
