Delta AH500 User Manual

AH500 Module Manual
10-38
10.8.2 Modifying the Data Length of the Slave
When AH10DNET-5A works in slave mode, the data length could be modified through the software
according to the following steps.
1. Scan AH10DNET-5A in slave mode through the DeviceNet master.
“AH10DNET Slave” represents for AH10DNET-5A module in slave mode and “AH10DNET
Scanner” refers to AH10DNET-5A module in master mode as the following window shows.
The data length of AH10DNET Slave is modified through AH10DNET Scanner on the software.
2. After scanning is successful, right click “AH10DNET-5A (Slave)”and select “Parameters Edit…”.

Delta AH500 Specifications

General

Brand	Delta
Model	AH500
Category	Controller
Language	English