Delta ASD-M-0721 Series User Manual

Chapter 8 Parameters ASDA-M
8-30 Revision December, 2014
P0-35 MAP1A
Target Setting of Mapping Parameter
P0-25
Address: 0046H
0047H
Parameter
Attribute：
Parameter for individual axis
Related Section:
Section 4.3.5
Operational
Interface：
Panel / Software Communication
Default：
0x0
Control
Mode：
ALL
Unit：
-
Range：
determined by the communication
address of the parameter group
Data Size：
32bit
Format：
HEX
Settings：
Select the data block to access the parameter corresponded by
register 1.
The mapping content is 32 bits wide and can map to two 16-bit
parameters or one 32-bit parameter.
P0-35:
Mapping parameter: P0-35; Mapping content: P0-25.
When PH≠PL, it means the content of P0-25 includes two 16-bit
parameters.
VH=*(PH)，VL=*(PL)
Mapping parameter: P0-35; Mapping content: P0-25.

Delta ASD-M-0721 Series Specifications

General

Brand	Delta
Model	ASD-M-0721 Series
Category	Servo Drives
Language	English