Delta ECMA-C 0807 Series - Page 460

ASDA-A2 Chapter 8 Parameters
Revision February, 2017 8-209
P5-93 CSDS
Motion Control Macro Command: Command
Parameter # 4
Address: 05BAH
05BBH
Operational
Interface：
Panel / Software Communication
Related Section: -
Default：
0
Control
Mode：
ALL
Unit：
-
Range：
-100000000 ~ +100000000
Data Size：
32-bit
Format：
Decimal
Settings：
Before issuing the macro command, the relevant parameters # 4 must
be set in advance.
The function of the parameter is determined by the macro command.
Not every macro command has its relevant parameters.
P5-94 CSDS
Motion Control Macro Command: Command
Parameter # 3
Address: 05BCH
05BDH
Operational
Interface：
Panel / Software Communication
Related Section: -
Default：
0
Control
Mode：
ALL
Unit：
-
Range：
-2147483648 ~ +2147483647
Data Size：
32-bit
Format：
Decimal
Settings：
Before issuing the macro command, the relevant parameters # 3 must
be set in advance.
The function of the parameter is determined by the macro command.
Not every macro command has its relevant parameters.