Delta ECMA-C 0807 Series - Page 461

Chapter 8 Parameters ASDA-A2
8-210 Revision February, 2017
P5-95 CSDS
Motion Control Macro Command: Command
Parameter # 2
Address: 05BEH
05BFH
Operational
Interface：
Panel / Software Communication
Related Section: -
Default：
0
Control
Mode：
ALL
Unit：
-
Range：
-2147483648 ~ +2147483647
Data Size：
32-bit
Format：
Decimal
Settings：
Before issuing the macro command, the relevant parameters # 2 must
be set in advance.
The function of the parameter is determined by the macro command.
Not every macro command has its relevant parameters.
P5-96 CSDS
Motion Control Macro Command: Command
Parameter # 1
Address: 05C0H
05C1H
Operational
Interface：
Panel / Software Communication
Related Section: -
Default：
0
Control
Mode：
ALL
Unit：
-
Range：
-2147483648 ~ +2147483647
Data Size：
32-bit
Format：
Decimal
Settings：
Before issuing the macro command, the relevant parameters # 1 must
be set in advance.
The function of the parameter is determined by the macro command.
Not every macro command has its relevant parameters.