Delta H2.5 User Manual

2 Installation and Wiring
2.1 Instruction before Installation
Due to the variety of users and installation environments, you must read this
manual thoroughly before installation. Installation of the unit and start-up
procedures must be carried out by an accredited technician.
Upon receiving your brand new RPI inverter, you will be required to remove it’s
protective packaging. This packaging consists of various materials that will need
to be disposed of according to the specific recycling marking printed on them.
2.2 Unpacking
Unpacking process is shown as Figure 2-1.
Figure 2-1 : Unpacking process
7
Installation and Wiring

Delta H2.5 Specifications

General

Brand	Delta
Model	H2.5
Category	Inverter
Language	English