3.7 Wi-Fi
The communication module supports the inverter to communicate with devices
(such as smartphones, tablets, etc.) via Wi-Fi. User can restart or shutdown the
function through the APP or DSS.
There is an antenna for Wi-Fi in the package (item 8,
Table 2-1
), which must be
mounted on the plastic carrier as the procedure below.
1. Remove the protective nut.
2. Tighten the antenna.
Figure 3-23: Installation of Wi-Fi antenna
ATTENTION
- Please refer the QR-code for the operation guideline of Wi-Fi and APP
https://mydeltasolar.deltaww.com/?p=product_manual
- Please properly tighten up the antenna as figure below.
39
Commissioning
To Next Page
Loading...
