Figure 5-2: To secure door by hexagon driver
5.1.2 Close Door
1. Ensure that the gasket in the mounting slot and mating surface on the
enclosure are clean and in good condition.
2. Make sure all protective covers are properly installed.
3. Remove the hexagon wrench and close the door.
4. Buckle the latch and secure the latch cover with the hexagon wrench.
5. The hexagon wrench can be fixed on the latch cover.
- Due to corrosion of live parts, excessive moisture or dust in the inverter may
cause accidental damage. Ensuring that the inner of the inverter is clean free
from unreasonable pollution is important for long service operating systems.
ATTENTION
49
Maintenance
To Next Page
Loading...
