RMC70 Startup Guide
24 Delta Computer Systems, Inc.
Manual Tuning–Position, Pressure, or Force Axes
You can manually tune systems for which autotuning does not work.
For instructions:
4. On the help menu, choose Help Topics.
5. On the Index tab, type tuning and double-click about.
6. The Tuning Overview topic describes tuning.
In the Manual Tuning section, choose a procedure. For most
position control applications, choose Tuning a Hydraulic Position
Axis or Motor in Velocity Mode. For pressure or force, choose the
procedure that applies to your axis.
After tuning, save the project and update Flash.
To Next Page
