Delta RMC70 - Table of Contents

Contents
deltamotion.com 1
Contents
Step 1: Add Expansion Modules .................................... 2
Step 2: Mounting ............................................................. 3
Step 3: Wiring ................................................................. 4
Step 4: Install RMCTools ................................................ 5
Step 5: Connect RMC to PC ........................................... 6
Step 6: Start a New Project ............................................ 7
Step 7: Define the Axes ................................................ 11
Step 8: Test an Actuator ............................................... 13
Step 9: Test Feedback Device ..................................... 16
Step 10: Scale and Offset ............................................. 20
Step 11: Set the Output Polarity ................................... 21
Step 12: Tuning ............................................................ 22
Continuing the Motion Application ................................ 25
Diagnostic Tools ........................................................... 27
Appendix A: Wiring ....................................................... 28
Appendix B: Mounting Dimensions ............................... 43
Appendix C: Agency Compliance ................................. 45
Version 4.00, June 1, 2017
Copyright © 2017, Delta Computer Systems, Inc.