9
4 Installation
4.1 Installation Location
WARNING!
Do not install the unit near or on flammable surfaces.
Please mount the unit tightly on a solid/smooth surface
CAUTION!
The unit should not be installed in direct sunlight.
4.2 Mounting
This unit is designed to be wall-mounted. Please ensure the installation is
perpendicular to the floor and the AC plug located at the base of the unit. Do
not install the device on a slanting wall. The dimensions of the mounting
bracket are shown in the figure below. 8 ofφ5.5mm screws are required for
the mounting plate(hole size: φ6.5mm). Fix the supplied wall-mount plate
securely on the wall before attaching the inverter onto the mounting plate.
To Next Page
Loading...
