11
CAUTION!
• The bracket supplied with the unit is specially designed and should be the
only mounting device used for the unit.
• It is recommended to install the inverter in a suitable location which offers
easy and safe access for service and maintenance.
• Please leave an appropriate gap in between units when installing multiple
solar inverter systems.
• Please install solar inverter at eye level to allow easy observation for
operation and parameter setting.
• Ambient temperature for operation: -25°C~+60°C (power derating above
40°C).
Please ensure the spacing requirement to allow for sufficient convective
cooling. It is essential to ensure sufficient space for product operation as
shown in Figure 4-3.
> 50CM
> 30CM > 30CM> 30CM
> 50CM
Figure 4-3: Adequate installation gap
To Next Page
Loading...
