Delta TP70P-211LC1T - Page 79

Chapter 5 Devices
5-23
5__
_
Special
D
Item Description Attibutes Default
K7: 200 ms
K8: 400 ms
D4532 Subtract tare
K0: disable
K1: subtract tare
K2: not subtract tare
K3: reset to zero
Once the setting is done, the status switches
back to ON. (M1667 = ON）
R/W
◎
K0
D4533 Gross / net weight seleciton K0: gross weight ; K1: net weight R/W
◎
K0
D4534 Times to check the stability K1 ~ K500 R/W
◎
K5
D4535
Times to check the stabilitiy
range
K1 ~ K10000 R/W
◎
K10
D4536 Upper limit of the zero return K0 ~ K32767 R/W
◎
K10
D4537 Lower limit of the zero return K-1 ~ K-32768 R/W
◎
K-10
D4538 Excitation voltage setting Unit 0.1 V; setting range: K20 ~ K100 R/W
◎
K50
D4539 Maximum weight (Low word)
You can set the maximum value and when the
measured weight exceeding the maximum
value, an error code will be recorded.
R/W
◎
K100000
D4540
Maximum weight (High
word)
R/W
◎
D4541 Filter mode setting
K0: no filter
K1: filter out the measured maximum weight
K2: average weights
R/W
◎
K0
D4542
Mode of filtering out the
measured maximum weight
K0 ~ K8
The greater the setting value is, the greater the
filtering is
R/W
◎
K0
D4543 Mode of averaging weights K1 ~ K100 R/W
◎
K1
D4544
Setting how many digits can
be set on the left of the
decimal point
K0 ~ K4 R/W
◎
K0
D4549 Zero point tracking range
Setting range: K0 ~ K30000; when set the
setting to 0, it indicates zero point tracking is
disabled.
R/W
◎
K0
D4550 Zero point tracking time Setting range: K5 ~ K1000; unit: 0.1 s R/W
◎
K5
D4551
Weight value before
resetting to zero (Low word)
Display the weight value before resetting to
zero
R
◎
K0
D4552
Weight value before
resetting to zero (High word)
R
◎
K0
D4553
Display tare weight
(Low word)
Display tare weight
Work with D4532=1 to edit the tare weight
When D4532=2, the tare weight cannot be edit.
R/W X K0
D4554
Display tare weight
(High word)
R/W X K0
D4555
Display the time of the
weight measured
Setting range: K0 ~ K10000; unit: 1 ms;
K0: present weight
R/W
◎
K1000