Chapter 5 Parameters_VFD-B Series 
5-104   
Revision 10/2005, BE13, SW V4.08 
#define RDR  0x0000 
#define BRDL  0x0000 
#define IER  0x0001 
#define BRDH 0x0001 
#define LCR  0x0003 
#define MCR  0x0004 
#define LSR  0x0005 
#define MSR  0x0006 
unsigned char rdat[60]; 
/* read 2 data from address 2102H of AC drive with address 1 */ 
 unsigned char tdat[60]={':','0','1','0','3','2','1','0',’2', '0','0','0','2','D','7','\r','\n'}; 
void main(){ 
  int i; 
  outportb(PORT+MCR,0x08);            /* interrupt enable */ 
  outportb(PORT+IER,0x01);            /* interrupt as data in */ 
  outportb(PORT+LCR,(inportb(PORT+LCR) | 0x80)); 
    /* the BRDL/BRDH can be access as LCR.b7==1 */ 
  outportb(PORT+BRDL,12);             /* set baudrate=9600, 12=115200/9600*/ 
  outportb(PORT+BRDH,0x00); 
  outportb(PORT+LCR,0x06);            /* set protocol, <7,N,2>=06H, <7,E,1>=1AH,  <7,O,1>=0AH, 
<8,N,2>=07H, <8,E,1>=1BH, <8,O,1>=0BH   */ 
  for(i=0;i<=16;i++){ 
    while(!(inportb(PORT+LSR) & 0x20)); /* wait until THR empty */ 
    outportb(PORT+THR,tdat[i]);       /* send data to THR */    } 
  i=0; 
  while(!kbhit()){ 
    if(inportb(PORT+LSR) & 0x01){ /* b0==1, read data ready */ 
      rdat[i++]=inportb(PORT+RDR); /* read data form RDR */ 
    }    }     }