Need help?Do you have a question about the Deltec PowerRite Pro and is the answer not in the manual?
General| Communication Ports | USB |
|---|---|
| Operating Temperature | 0-40°C |
| Output Frequency | 50Hz |
| Battery Recharge Time | 4-6 hours |
| Transfer Time | 4-6 ms |
Explains the advantages and key features of the PowerRite Pro UPS.
Describes the UPS's compact design and ease of installation.
Details the ABM feature for battery life and recharge time.
Explains the Boost and Buck system for output voltage regulation.
Describes the RS-232 port for host computer communication.
Explains the bi-directional filter for superior power conditioning.
Details the feature for automatic frequency selection for international use.
Explains the auto-shutdown feature to prevent battery discharge.
Provides contact information for the Customer Service Department.
Instructions for checking equipment for shipping damage and filing claims.
General safety precautions and advice to save the manual.
Describes different models and configurations of the PowerRite Pro UPS.
Shows visual representations and dimensions of the UPS units.
Details the rear panel configurations for North American UPS models.
Illustrates the rear panel layout for PRA400 and PRA600 models.
Illustrates the rear panel layout for PRA1000 and PRA1500 models.
Illustrates the rear panel layout for the PRA2000 model.
Illustrates the rear panel layout for the PRA2200 model.
Illustrates the rear panel layout for PRA2200b and PRA2201b models.
Details the rear panel configurations for international UPS models.
Illustrates the rear panel layout for the PRA400i international model.
Illustrates the rear panel layout for the PRA600i international model.
Illustrates the rear panel layout for PRA1000i, PRA1400i, PRA1800i, PRA2200i models.
Describes the front panel LEDs and icons for UPS operation and warnings.
Details the user-operable controls on the UPS rear panel.
Explains the function and location of the UPS ON/OFF switch.
Details the purpose of rear panel DIP switches for UPS configuration.
Describes the rear panel communication port for PC interface.
Step-by-step guide for installing North American UPS models.
Table detailing DIP switch settings for North American 120V and 208V models.
Step-by-step instruction for connecting the PRA Battery Box.
Instructions for connecting a computer for UPS monitoring via the Comm Port.
Step to connect the UPS power cord to the wall outlet.
Instructions for connecting peripheral devices to the UPS outlets.
Step to turn on the UPS and initiate self-diagnostics.
Verification step for successful UPS startup and LED indicators.
Step-by-step guide for installing international UPS models.
Table detailing DIP switch settings for international 230V models.
Step-by-step instruction for connecting the PRA Battery Box for international models.
Instructions for connecting a computer for UPS monitoring via the Comm Port for international models.
Step to disconnect the load from the wall outlet.
Step to connect the load's line cord to the UPS male inlet.
Step to connect the UPS to the load using the provided cable.
Step to turn on the UPS and initiate self-diagnostics for international models.
Verification step for successful UPS startup and LED indicators for international models.
Explains the UPS self-diagnostic test procedure upon power-up.
Describes the front panel LEDs and icons for UPS operation and warnings.
Provides a general overview of the UPS front panel indicators and controls.
Explains the LEDs indicating battery charge level and status.
Describes the ON LED status for power availability.
Explains the LEDs indicating AC input voltage conditions.
Describes the LEDs indicating the load percentage on the UPS.
Explains the Site Wiring Fault LED for ground or wire reversal issues.
Explains the Battery Service LED for potential battery failure.
Describes the Comm LED status for serial communication activity.
Explains the function of the Alarm Silence/Reset button.
Provides detailed descriptions for each AC Input LED condition.
Details the Site Wiring Fault LED and its disabling via DIP Switches.
Explains the various states of the five Battery LEDs for charge and status.
Details the Battery Service LED and its relation to potential battery failure.
Explains the Load LEDs indicating current draw and load percentage.
Details the Communication LED status for serial communication activity.
Provides detailed functions of the Alarm Silence/Reset button.
Describes the controls located on the rear panel of the UPS.
Detailed explanation of the UPS ON/OFF switch operation.
Detailed explanation of how to use DIP switches for UPS configuration.
Details the function of the communication port for UPS monitoring.
Table detailing the function and signal type for each pin of the communication port.
Recommends keeping the UPS area clean and dust-free.
Discusses factors affecting battery life, such as ambient temperature.
Explains automatic battery recharging after a power failure.
Instructions for storing the UPS unplugged, including battery recharging.
States there is no user maintenance other than battery charging.
Lists voltage, frequency, and connection specifications for electrical input.
Lists power levels, efficiency, and regulation for electrical output.
Details over-current protection mechanisms for on-line and on-battery states.
Specifies the battery type used in the UPS.
Provides information on battery charging times and methods.
Explains the battery monitoring system for early failure detection.
Lists expected backup time at different load levels.
Details input/output connection types for North American and International units.
Describes the noise filtering capabilities of the UPS.
Lists and describes the various indicators and controls on the UPS.
Explains the serial communication capabilities for UPS monitoring.
Describes the front panel indicators and bar graphs for status.
Explains the function of contact closure outputs for alarms.
Covers physical characteristics like temperature, humidity, altitude, and noise.
Specifies the surge suppression rating of the UPS.
Details the recommended operating temperature range.
Specifies the acceptable relative humidity range.
States the maximum operating altitude.
Specifies the maximum audible noise level.
Refers to the Model Specifications table for dimensions and weight.
Comprehensive table listing specifications for all UPS models.
Lists possible causes and solutions when the UPS fails to start.
Addresses issues with the low battery alarm providing insufficient warning.
Explains how to resolve the Site Wiring Fault LED being illuminated.
Provides guidance for when the Battery Service LED indicates a potential failure.
Solutions for persistent alarms after using the silence button.
Troubleshooting steps for a RED Battery Service LED during startup.
Explains overload conditions indicated by the Load symbol LED.
Diagnoses issues related to all battery LEDs being illuminated.
Interprets the SOLID RED bottom battery LED indicating low battery.
Addresses high AC input voltage indication.
Explains battery discharge and UPS stopping.
Interprets SOLID RED bottom AC Input LED for low line voltage.
Explains battery discharged and inverter stopped condition.
Troubleshoots short circuit conditions causing all LEDs to flash.
To Next Page