21491244.p65/201204
4
0 Foreword
You have purchased a Demag product.
This rail-guided handling equipment was manufactured in accordance with German
and European standards and regulations, e.g. EC Machinery Directive 98/37/EC,
and state-of-the-art engineering principles.
These assembly instructions are designed to provide the crane manufacturer with
appropriate instructions for safe and correct assembly and installation. The operat-
ing and assembly instructions of the corresponding products stated in the individual
sub-chapters form parts of these assembly instructions.
Every individual given the task of transporting, installing, commissioning, operating,
maintaining and repairing our rail-guided handling equipment and additional equip-
ment must have read and understood
• the assembly instructions
• the operating instructions,
• the safety regulations and
• the safety instructions in the individual chapters and sections.
The assembly instructions must be available to the assembly personnel at all times
in order to prevent assembly errors and to ensure smooth and trouble-free opera-
tion of our products.
These assembly instructions must be treated confidentially. They should only be
used by authorized personnel. They may only be entrusted or made available to
third parties with the prior written consent of Demag.
All documents are protected within the sense of copyright law.
No part of this documentation may be reproduced, utilized or transmitted without
specific prior consent. Infringements are an offence resulting in obligatory compen-
satory damages.
All industrial rights reserved.
For technical information on Demag products and their systematic application,
please refer to one of our after-sales service stations, the relevant representative
or to our main office in Wetter.
Our after-sales service will provide you with all technical information on Demag
products and their systematic application.
Should you have any questions regarding our products, please refer to one of our
after-sales service stations, the relevant representative or the manufacturer.
Kindly quote the serial or order number (see test and inspection booklet, load
capacity plate on the crane) in any correspondence or for spare part orders.
Specifying this data ensures that you receive the correct information or the required
spare parts.
The relevant after-sales service station of Demag is specified for example on the
back page of the hoist unit test and inspection booklet.
0.2 Customer service
0.1 Copyright
To Next Page
Loading...
Need help?
General
