5
21491244.p65/201204
These operating instructions must be read carefully before installing and putting the
rope hoist into operation.
We assume no liability for any damage and malfunctions resulting from failure to
comply with the operating instructions.
Any liability claims for defects must be made by quoting the order number immedi-
ately on detecting the defect.
Any liability claims for defects are void in the event of:
• inappropriate use,
• faulty devices or equipment connected or attached to the system which are not
part of our scope of supplies and services,
• use of non-genuine spare parts and accessories,
• refurbishment or modification of the product unless approved in writing by
Demag.
Wearing parts are not subject to liability for defects.
All technical information, data and instructions for operation contained in these
operating instructions were up-to-date on going to print and are compiled on the
basis of our experience and to the best of our knowledge.
We reserve the right to incorporate technical modifications within the scope of fur-
ther development of the rope hoists which are the subject of these operating in-
structions.
The information, illustrations and descriptions contained in these operating instruc-
tions are therefore only intended for information purposes.
The descriptions and illustrations contained in this documentation do not necessari-
ly correspond to the scope of delivery or any subsequent spare part delivery, either;
the drawings and illustrations are not to scale.
Only documentation belonging to the actual order is valid.
We assume no liability for damage and malfunctions caused as a result of operating
errors, non-compliance with these operating instructions or inappropriate repairs
and maintenance.
We expressly point out that only genuine Demag spare parts and accessories ap-
proved by us may be used. Accordingly, this also applies to other manufacturers’
parts supplied by us.
For safety reasons, the fitting and use of spare parts or accessories which have not
been approved and unauthorized modification and conversion of the product are
not permitted and exempt Demag from any liability for damages resulting therefrom.
With the exclusion of any further claims, we are liable for any defects or omissions
on our part in the products or documentation supplied within the scope of the liabil-
ity obligations entered into in the original contract. Any further claims, in particular
any and all claims for damages, are excluded with the exception of legal claims in
accordance with product liability legislation.
0.3 Liability for defects
0.4 Limitations of liability
To Next Page
Loading...
Need help?
General
