80
Attention! Disinfect electrode of the device with standard disinfection solution (such
as 3 % penozone) after session. Make sure that the electrode of the device is dry when
storing.
1.4 Treatment with the Device.
1.4.1 Treatment Methods.
Treatment is performed with stimulation of reexogenic zones of dierent areas and
biologically active points with the in-built electrode of the device or the relevant
external therapeutic electrodes There are three methods of stimulation: stable, instable
and stable / instable.
1.4.1.1 Stable Method.
With this method, electrodes stay xed on the selected zone during the whole stimulation
session. It can be used for stimulation of small zones and biologically active points. This
method can also be used for treatment of bigger zones when there is risk to damage
the skin. In that case, electrodes are consequently applied on the next area of the skin.
To Next Page
Loading...
