96
Place the electrodes on Qigong area and set the stimulation intensity by using
and keys. It is recommended to set minimal or comfort intensity level.
Attention! Stimulation when using MED Program should be performed with in-build
electrode only.
Attention! When the device is operated in MED mode, electrode should be kept stable
on the patient’s skin i.e. it is not allowed to move the electrodes of the device during its
operation.
Attention! Control the intensity level according to patient’s subjective sensations of
electrode contacting the skin. It is not advisable to exceed the tolerance threshold.
MED Program consists of two phases. The device provides sound signal at the end
of each phase.
To Next Page
Loading...
