Denon AVP-A1HD User Manual (English)

Other manuals for Denon AVP-A1HD

Product Review16 pages

Product Compatibility Chart1 page

Questions and Answers:

C
Christopher BaileyAug 29, 2025
Why can't I play Internet radio on my Denon AVP-A1HD?
- S
  Shannon ThompsonAug 29, 2025
  If your Denon Amplifier is not playing Internet radio, verify that the Ethernet cable is properly connected and that your network is connected. Note that only Internet radio programs in MP3 and WMA formats can be played. Check your computer’s or router’s firewall settings to ensure they are not blocking the connection. Also, the radio station might not be currently broadcasting, so try another station. Finally, check the amplifier's IP address to ensure it is correct.
J
Jimmy MooreAug 28, 2025
How to get HDMI audio from Denon Amplifier speakers?
- F
  fullerelizabethAug 29, 2025
  If your Denon Amplifier isn't outputting HDMI audio signals from the speakers, check the “Manual Setup” – “HDMI Setup” – “Audio” setting. If it's set to “TV”, change it to “Amp.”
B
benjamin90Aug 28, 2025
What does it mean when my Denon AVP-A1HD power turns off and the indicator flashes red?
- T
  Todd BlackwellAug 28, 2025
  If your Denon Amplifier suddenly turns off and the power indicator flashes red, the set may be damaged. Turn off the power and contact a DENON service center.
M
Matthew JohnstonAug 27, 2025
How to troubleshoot no picture with HDMI on Denon Amplifier?
- G
  George MitchellAug 27, 2025
  If no picture is appearing when using HDMI connections on your Denon Amplifier, verify that the HDMI connections are correctly and securely connected. Check the HDMI input setting. Ensure that your monitor is compatible with copyright protection (HDCP). Also, make sure that the HDMI format of both the player and the monitor match. If you've set the output to “Auto (Dual)”, try setting it to either “Monitor 1” or “Monitor 2”, as the display may not be correct in “Auto (Dual)” mode depending on the monitor you have connected.
J
jessica47Aug 27, 2025
Why is there no sound from my Denon Amplifier surround speakers?
- M
  morenoarianaAug 27, 2025
  If no sound is produced from your Denon Amplifier's surround speakers, the surround mode may be set to “STEREO”, “DIRECT” or “PURE DIRECT”. Change the setting to a surround playback mode.
A
Aaron HaleAug 27, 2025
Why is there no sound from my Denon AVP-A1HD Amplifier center speaker?
- L
  Lisa PattersonAug 27, 2025
  If no sound is produced from the center speaker of your Denon Amplifier, you might be playing a monaural source (like TV or AM radio) in “STANDARD” (Dolby/DTS Surround) or “HOME THX CINEMA” mode. Try setting the mode to something other than “STANDARD” (Dolby/DTS Surround) or “HOME THX CINEMA”.
C
christiangarciaAug 26, 2025
What to do if Denon Amplifier power does not turn on?
- K
  Kelly BellAug 26, 2025
  If your Denon Amplifier does not turn on, or turns off directly after it was turned on, check that the power cord is securely inserted into both the amplifier's AC inlet and the wall power outlet.
A
Alejandro GutierrezAug 25, 2025
Why is there no sound coming from my Denon Amplifier speakers?
- E
  Elizabeth HowardAug 26, 2025
  If no sound comes from the speakers connected to your Denon Amplifier, first, check all the connections to ensure they are secure. Then, verify that the input source selected on the amplifier matches the device you are trying to play. Also, make sure that the master volume isn't set too low and that mute mode is off. Disconnect any headphones that may be plugged in. Finally, confirm that the correct input source is selected for digital input and that the input mode matches the connectors assigned to the digital inputs.
J
Jillian AndradeAug 25, 2025
What to do if my Denon Amplifier subwoofer is not producing sound?
- T
  Tammy CollinsAug 25, 2025
  If your Denon Amplifier isn't producing sound from the subwoofer, first, ensure the subwoofer is powered on. Next, check the “Subwoofer” setting in “Speaker configuration” and make sure it is set to “Yes.” Verify that the subwoofer is properly connected. Finally, adjust the subwoofer's volume to an appropriate level, ensuring it is not turned off.

Denon AVP-A1HD Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.005 %
Power output per channel (1KHz@6 Ohm)	170 W
Power output per channel (20-20KHz@8 Ohm)	- W
RS-232 ports	2
Connectivity technology	Wired
Speakers connectivity type	XLR
Multichannel pre out connectivity	RCA
Ethernet LAN	Yes
Supported radio bands	-
Optical drive included	No
HDMI version	1.3a
Product color	Silver
Audio decoders	Dolby Surround, DTS-HD
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
HDMI in	6
Audio (L/R) in	10
Composite video in	8
Digital audio optical in	5
Ethernet LAN (RJ-45) ports	1
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	150 W
Composite video out	3
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG

Weight and Dimensions

Depth	214 mm
Width	434 mm
Height	485 mm
Weight	27500 g

Denon AVP-A1HD User Manual

Table of Contents

Other manuals for Denon AVP-A1HD

Questions and Answers:

Denon AVP-A1HD Specifications