Denon AVR-1404 Operating Instructions

ENGLISH
Blo) o\aslUlaceliite Mm mgem Motel (ems Meares (=
1 Select the function to which the component you want to play
is connected.
Example: DVD
INPUT SELECTOR DVD/VDP
(Main unit) (Remote control unit}
2 Select the Dolby Surround Pro Logic II mode.
DOLBY / DTS
SURROUND DOLBY/ DTS
SURROUND
S \ The Dolby Surround Pro Logic II
Cinema or Music mode can be
(Main unit) (Remote control unit) chosen directly by pressing the
CINEMA or MUSIC button on
the remote control unit during
playback in the Dolby Surround
Pro Logic Il mode.
¢ The Dolby Pro Logic indicator lights.
Display Light
DOPRO LOGIC II
3 Play a program source with the [Xi] [Bousysurnounn] mark.
¢ For operating instructions, refer to the manuals of the
respective components.
4 Select the surround parameter mode.
SURROUND SURROUND
PARAMETER PARAMETER
cli PHS
G
(Main unit) (Remote control unit)
% To perform this operation from the remote control unit,
check that the mode selector switch is set to “AUDIO”.
5 Select the optimum mode for the source.
6 Set the surround parameters according to the mode.
SELECT SURROUND SURROUND
(
)
PARAMETER
PARAMETER
Gl
(Main unit) (Remote control unit) (Main unit) (Remote control unit)
e The mode switches as shown below each time the button
is pressed.
MODE Dolby PL MODE CINEMA MODE MUSIC
CINEMA EQ CINEMA EQ PANORAMA
DEFAULT DEFAULT DIMENSION
CENTER WIDTH
DEFAULT
33

Denon AVR-1404 Specifications

General

Brand	Denon
Model	AVR-1404
Category	Stereo Receiver
Language	English