Denon AVR-1404 - Page 35

ENGLISH
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1 Select the input source.
Playback with a digital input
@ Select an input source set to digital (COAXIAL/OPTICAL)
(see page 20).
Example: DVD
INPUT SELECTOR DVD/VDP
(Main unit) (Remote control unit)
@® Set the input mode to “AUTO” or DTS.
INPUT MODE
&.
TS
(Main unit) (Remote control unit}
2 Select the Dolby/DTS Surround mode.
DOLBY/DTS 2
SURROUND DOLBY/ DTS
SURROUND
" 1
(Main unit) (Remote control unit)
3 Play a program source with the Dd [ecsy] 7 Press mark.
DISTAL e The Dolby Digital indicator lights when
o-- Light playing Dolby Digital sources.
ides ie © The DTS indicator lights when playing
oe DTS sources.
5,6,7,8
4 Set the surround parameter according to the source.
First, press the SURROUND PARAMETER button.
SURROUND
PARAMETER
Gl
{Remote control unit)
NOTE:
Please make sure the “AUDIO” position of the slide switch
on the remote control unit.
5 A Use the 8 (left) and § (right) buttons to set the CINEMA EQ. '
(Initia
c=
(Remote control unit}
‘SURROUND
(left)
button
(right)
button
"ARAMETER
GSR Press the SURROUND PARAMETER or <= (down) button to switch to the D. COMP. setting.
Gl
(Remote control unit)
35