Denon AVR-1513

16
SPECIAL MODE
Special mode setting button
b
Press the
X
button to turn on the power while pressing both the button A and the button B at the same time.
Mode Button A Button B Contents
µcom/DSP/OSD Version display
mode
STATUS DIMMER
Firmware versions such as Main, DSP or OSD are displayed
in the FL display. Errors are displayed or when they occur.
(Refer to 17 page.)
Initialization mode
SOURCE
SELECT
0
SOURCE
SELECT
1
Backup data initialization is carried out. (Refer to 9 page.)
Mode for switching tuner frequency
step
DIMMER
SOURCE
SELECT
1
---E2 model only---
Change tuner frequency step to AM9k/FM50kHz STEP or
AM:10k/FM:200kHz.
b
When power is turned on, pressing both buttons A and B at the same time for 3 seconds or more.
Mode Button A Button B Contents
Select the video signal format STATUS
SOURCE
SELECT
0
Select with the "SOURCE SELECT
0
", "SOURCE SELECT
1
" and "STATUS" button change video format NTSC or PAL.
Mode for preventing remote control
acceptance
ST
ATUS DIMMER
Operations using the remote control are rejected.
"REMOTE LOCK:ON" is displayed in FL display.
(Mode the cancellation: Execute the same button operations
as when performing setup.)
X
DIMMER
STATUSSOURCE SELECT 0
SOURCE SELECT 1