Denon AVR-1705 Operating Instructions

23
ENGLISH
5, 74, 61 2
4, 6
5, 7
1
8
5, 7
2
DTS NEO:6 mode
1
Select the function to which the component you
want to play is connected.
Example: DVD
(Main unit) (Remote control unit)
2
Select the DTS NEO:6 mode.
(Main unit) (Remote control unit)
3
Play a program source.
• The mode switches as shown below each
time the button is pressed.
DOLBY PLIIx cinema
DTS NEO:6
The DTS NEO:6 Cinema or
Music mode can be chosen
directly by pressing the
CINEMA or MUSIC button
on the remote control unit
during playback in the DTS
NEO:6 mode.
8
Press the ENTER button to finish surround parameter mode.
(Remote control unit)
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the
last button was pressed and the setting will be completed.
• DEFAULT setting
YES Y/N NO
or or
DEFAULT Y/N
Select “Yes” to reset to the factory defaults.
5
Select the optimum mode for the source.
(Main unit)
(Remote control unit)
• When the “SURROUND BACK” parameter is set to “ON”. (Set “S. BACK” at
system set up to “SMALL” or“LARGE”.)
(Pro Logic IIx
Cinema mode)
(Pro Logic IIx
Music mode)
(Pro Logic IIx
Game mode)
or
or
• When the “SURROUND BACK” parameter is set to “OFF”. (Set “S. BACK”
at system set up to “NONE””.)
(Pro Logic II
Cinema mode)
(Pro Logic
II
Music mode)
(Pro Logic
II
Game mode)
or
or
(Dolby Pro Logic
mode)
6
Set the surround parameters according to the mode.
(Main unit)
(Remote control unit)
• The mode switches as shown below each time the button is pressed.
MODE CINEMA
CINEMA EQ
TONE DEFEAT
DEFAULT
MODE MUSIC
TONE DEFEAT
SURROUND BACK
PANORAMA
DEFAULT
DIMENSION
MODE Dolby PL
CINEMA EQ
TONE DEFEAT
SURROUND BACK
DEFAULT
SURROUND BACK
CENTER WIDTH
MODE GAME
TONE DEFEAT
SURROUND BACK
DEFAULT
If you do want the bass and trable to be adjusted, turn off the tone defeat
mode.
7
Set the various surround parameters.
• CINEMA EQ setting
ON OFF
or or
CINEMA EQ OFF
• PANORAMA setting
ON OFF
or or
PANORAMA OFF
• DIMENSION setting
0 3 6
or or
DIMENSION 3
• CENTER WIDTH setting
0
CENTER WIDTH 3
4 7
or or
• TONE DEFEAT setting
ON OFF
or or
TONE DEF. ON
• SURROUND BACK SPEAKER setting
ON OFF
or or
SB : ON
• D.COMP. setting
OFF
LOW MID HIGH
oror
D.COMP. OFF
NOTE:
• This parameter is displayed during DOLBY
DIGITAL playback.
• LFE setting
-10dB
-5dB 0dB
oror
LFE 0dB
NOTE:
• This parameter is displayed during DOLBY
DIGITAL playback.

Denon AVR-1705 Specifications

General

Speakers connectivity type	-
Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	6.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Power output per channel (1KHz@6 Ohm)	110 W
Power output per channel (20-20KHz@8 Ohm)	75 W
Product color	Black
Audio decoders	DTS, DTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), Dolby Digital, Dolby Digital EX
Digital Signal Processing (DSP)	Yes
AM band range	520 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Preset stations quantity	56
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	230 W
Optical drive included	No
HDMI in	0
Composite video in	4
S-Video inputs quantity	3
Digital audio optical in	1
S-Video outputs quantity	2

Weight and Dimensions

Depth	417 mm
Width	434 mm
Height	147 mm
Weight	10900 g