Why is “DOLBY DIGITAL” not displayed on my Denon AVR-1907?
- Jjulie76Sep 9, 2025
If “DOLBY DIGITAL” is not displayed on your Denon Stereo Receiver, check the DVD player’s audio output setting to ensure it is properly configured.

Why is “DOLBY DIGITAL” not displayed on my Denon AVR-1907?
If “DOLBY DIGITAL” is not displayed on your Denon Stereo Receiver, check the DVD player’s audio output setting to ensure it is properly configured.
What does “CHECK ANTENNA” mean on my Denon AVR-1907 in XM mode?
If “CHECK ANTENNA” is displayed in the XM mode on your Denon Stereo Receiver, check that the receiver's XM connectors and the XM Passport System are properly connected.
What does “NO SIGNAL” mean on my Denon AVR-1907 Stereo Receiver in XM mode?
If “NO SIGNAL” is displayed in the XM mode on your Denon Stereo Receiver, reposition your XM Passport System.
What does “OFF AIR” mean on my Denon AVR-1907 in XM mode?
If “OFF AIR” is displayed in the XM mode on your Denon Stereo Receiver, select another channel because the selected channel is not currently broadcasting.
| Speakers connectivity type | - |
|---|---|
| Equalizer | Yes |
| Product color | Black |
| Audio decoders | DTS, DTS 96/24, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), Dolby Digital, Dolby Digital EX, Dolby Pro Logic IIx |
| Apple docking compatibility | iPod |
| Receiver type | Surround |
| Audio output channels | 7.1 channels |
| Power output per channel (1KHz@6 Ohm) | 120 W |
| Power output per channel (20-20KHz@8 Ohm) | 85 W |
| Wi-Fi | No |
Check leakage current before returning the unit to the customer.
Important points for safe and correct servicing and inspection.
Procedure for initializing the AV SURROUND RECEIVER.
Procedure for initializing the AV surround amplifier (Japanese).
Procedure to adjust the idling current for the audio section.
Initial setup steps for video signal testing and adjustment.
Preliminary steps required before performing video signal adjustments.
Setting up and verifying the DVD player for video testing procedures.
Preparation steps for video adjustment procedures.
Integrated circuits used in the unit.
Pin configuration and function for IC201 M30624FGPFP.
Pin functions for BU2090F IC.
Pin functions for MM74LCX244 IC.
Details of BA7626 IC.
Details of 74LVX157MTC IC.
Details of LH28F800BJE IC.
Details of SN74LV573APWR IC.
Details of AS7C34096A-10TCN IC.
Details of LC74781 IC.
Details and pin function description of ADV7180BSTZ IC.
Details of ADV7172KSTZ IC.
Pin layout and connections for the FL display.
Grid assignment for the FL display segments.
Timing chart for anode signals in the FL display.
Timing chart for grid signals in the FL display.
Component side layout of the main printed wiring board.
Foil side layout of the main printed wiring board.
Component side layout of the CPU P.W.B. unit.
Foil side layout of the CPU P.W.B. unit.
Various types of tactile and other switches used.
Connectors, jacks, and other miscellaneous parts.
List of parts to be removed during recycling processing.
Schematic diagrams for the main unit.
Schematics for front, pre-out, power, function, H/P, optical, and V.AUX units.
Schematic diagrams for the CPU unit.
Schematic diagrams for the CNT unit.
Schematics for pre-amp and SB-AMP & XM POWER units.
Schematic diagrams for the 8CH_EXT(XM) unit.
Schematic diagrams for the input/volume unit.
Schematic diagrams for the DSP unit (part 1).
Schematic diagrams for the DSP unit (part 2).
Schematic diagrams for the C-VIDEO unit.
Schematic diagrams for the S VIDEO unit.
Schematic diagrams for the COMPO unit.
Schematic diagrams for the D-VIDEO unit.
Schematic diagrams for the 8CH_EXT(E2) unit.
Loading...