Denon AVR-1910 User Manual (English)

Other manuals for Denon AVR-1910

Owner's Manual76 pages

Specification2 pages

Getting Started2 pages

Questions and Answers:

D
Deanna SmithAug 27, 2025
Why is Dolby TrueHD, DTS-HD, or Dolby Digital Plus audio not outputting on my Denon AVR-1910?
- J
  James WestAug 27, 2025
  If you're not getting Dolby TrueHD, DTS-HD, or Dolby Digital Plus audio on your Denon Receiver, it could be due to a few reasons: Ensure the HDMI is properly connected. Check that the Blu-ray Disc player’s audio output setting is set to bitstream. Also, verify that your Blu-ray Disc player is compatible with DTS sound playback. Consult your Blu-ray Disc player’s instructions for setting adjustments.
D
David RiosAug 26, 2025
How to get sound from monitor connected with HDMI connections on Denon AVR-1910 Receiver?
- A
  Allison KnightAug 26, 2025
  If no sound is output from the monitor connected via HDMI to your Denon Receiver, check the “Manual Setup” – “HDMI Setup” – “HDMI Audio Out” setting. If this setting is set to “AMP”, change it to “TV”.
W
William RichardsonAug 25, 2025
How do I get HDMI audio to output from speakers on my Denon Receiver?
- M
  Mr. Scott WalkerAug 26, 2025
  If HDMI audio signals are not being output from the speakers connected to your Denon Receiver, check the “Manual Setup” – “HDMI Setup” – “HDMI Audio Out” setting. If it is set to “TV”, change it to “AMP”.
J
Jenna ThomasAug 25, 2025
Why is there no sound coming from the subwoofer connected to my Denon AVR-1910 Receiver?
- J
  jenniferwhiteAug 25, 2025
  If your subwoofer isn't producing sound with your Denon Receiver, check these items: First, make sure the subwoofer is powered on. Then, verify that the “Subwoofer” setting in “Speaker Config.” is set to “Yes”. Ensure the subwoofer is properly connected to the receiver. Finally, check the subwoofer's volume level and adjust it to an appropriate setting.

Denon AVR-1910 Specifications

General

Speakers connectivity type	-
Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	90 W
Equalizer	Yes
Product color	Black
Audio decoders	DTS-HD Master Audio, Dolby Pro Logic IIz, Dolby TrueHD
Apple docking compatibility	iPod
Optical drive included	No
AM band range	520 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	0.3 W
HDMI in	4
S-Video inputs quantity	1
Component video (YPbPr/YCbCr) in	2