EasyManuals Logo

Denon AVR-3805 User Manual

Denon AVR-3805
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
66
Playing audio sources (CDs and DVDs)
The AVR-3805 is equipped with three 2-channel playback modes exclusively for music.
Select the mode to suit your tastes.
1
PURE DIRECT mode
In this mode, the music is played with an extremely high level
of sound quality.
When this mode is set, all the video-related circuits are turned
off so that music signals can be reproduced with high quality.
When an analog mode is selected, the digital processing
circuitry is also turned off to achieve analog sound with even
higher purity. (See NOTES)
(Main unit)
2
DIRECT mode
Use this mode to achieve good quality 2-channel sound while
watching images. In this mode, the audio signals bypass
such circuits as the tone circuit and are transmitted directly,
resulting in good quality sound.
3
STEREO mode
Use this mode to adjust the tone and achieve the desired
sound while watching images.
(Main unit)
(Main unit)
4
VIDEO ON/OFF button
When no video signals of a DVD, etc., are connected to the
AVR-3805 and the DVD, etc., are connected directly to a TV,
etc., the unneeded video circuitry can be turned off by
selecting the “VIDEO OFF” setting.
(Remote control unit)
NOTES:
The system setup function cannot be used when the PURE DIRECT
mode is set. To use the system setup function, cancel the PURE
DIRECT mode.
The ZONE2 video output is not output in the PURE DIRECT mode.
The channel level and surround parameters in the PURE DIRECT
mode are the same as in the DIRECT mode.
When the PURE DIRECT button is pressed while in the PURE
DIRECT mode, the PURE DIRECT mode is cancelled.
The subwoofer’s channel level must be set to “OFF” in order to
turn off the digital circuit in the PURE DIRECT mode.
312
4
1
1~3
3
2
Using this mode, the DSD (2-channel/MULTI-channel)
signal can be reproduced with high quality.
The display in 2-channel input.
DSD DIRECT
The display in MULTI-channel input
DSD MULTI DRCT
(Remote control unit) (Remote control unit)
(Remote control unit) (Remote control unit)
(Remote control unit) (Remote control unit)

Table of Contents

Other manuals for Denon AVR-3805

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-3805 and is the answer not in the manual?

Denon AVR-3805 Specifications

General IconGeneral
Receiver typeSurround
Frequency range10 - 100000 Hz
Speaker selectorA / B
Input sensitivity200 mV
Pre-out connectivityYes
Audio output channels7.1 channels
Signal-to-Noise Ratio (SNR)102 dB
Total Harmonic Distortion (THD)0.05 %
Power output per channel (1KHz@6 Ohm)160 W
Power output per channel (20-20KHz@8 Ohm)120 W
AC input voltage120 V
AC input frequency60 Hz
AM band range520 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
Preset stations quantity56
HDMI in0
Audio (L/R) in11
Remote control in1
Composite video in7
Digital audio coaxial in2
Digital audio optical in5
Component video (YPbPr/YCbCr) in3
AirPlayNo
Display-
Product colorBlack
Audio decodersDTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), Dolby Digital EX, Dolby Pro Logic IIx
Apple docking compatibilityNot supported
Speakers connectivity typeRCA
Weight and Dimensions IconWeight and Dimensions
Depth429 mm
Width434 mm
Height171 mm
Weight17000 g

Related product manuals