Denon AVR-391 Owner's Manual

22
ENGLISH
3
Press SURROUND PARAMETER
and then press ENTER .
Mode:• Cinema –
4
Use o p to select the mode according to the content
to be played and then press ENTER.
Cinema
This mode is suited for movie sources.
Music
This mode is suited for music sources. More sound
is sent to the front speakers than in “Cinema”
mode.
Game
This mode is suited for games.
Pro Logic
z
This mode is suitable for playback of 2-channel
sources recorded with Dolby Pro Logic.
zThis can be selected when “Speaker Confi g.” – “S.B(Pre)”
(vpage7) is not set to “None”.
5
Press SURROUND PARAMETER.
The menu returns to normal display.
n Surround playback of multi-channel sources
(Dolby Digital, DTS etc.)
1
Playing the source (vpage 17 – 20).
2
GOperations with the remote
control unitH
Press SURROUND 0 or
SURROUND 1 to select the
surround decoder to play back
multichannel sound.
Select the surround mode while viewing
the display on the display of this unit.
GOperations with the main unitH
Press STANDARD to select
the surround decoder to
play back multichannel
sound.
• Which decoder can be selected depends on the input signal, the
settings of “Speaker Confi g.” (vpage7).
Displaying the currently playing surround mode
Input signal Surround mode Display
DOLBY DIGITAL
(other than 2ch) /
DOLBY DIGITAL EX
DOLBY DIGITAL
DOLBY DIGITAL
DOLBY DIGITAL EX
DOLBY DIGITAL EX
DOLBY DIGITAL + PLgx
CINEMA
DOLBY D PL x C
DOLBY DIGITAL + PLgx MUSIC
DOLBY D PL x M
DOLBY DIGITAL Plus DOLBY DIGITAL Plus
DOLBY DIGITAL +
DOLBY TrueHD DOLBY TrueHD
DOLBY TrueHD
DTS (5.1ch) /
DTS-ES Discrete 6.1 /
DTS-ES Matrix 6.1 /
DTS 96/24
DTS SURROUND
DTS SURROUND
DTS + PLgx CINEMA
DTS PL x C
DTS + PLgx MUSIC
DTS PL x M
DTS + NEO:6
DTS NEO:6
DTS ES MTRX6.1
z1
DTS ES MTRX6.1
DTS ES DSCRT6.1
z2
DTS ES DSCRT6.1
DTS 96/24
z3
DTS 96/24
DTS-HD
DTS-HD HI RES
DTS-HD HI RES
DTS-HD MSTR
DTS-HD MSTR
DTS Express
DTS Express
PCM (multi ch)
MULTI CH IN
MULTI CH IN
MULTI IN + PLgx CINEMA
MULTI IN PL x C
MULTI IN + PLgx MUSIC
MULTI IN PL x M
MULTI CH IN 7.1
MULTI CH IN 7.1
z1 This is displayed when the input signal is “DTS-ES Matrix 6.1” and this unit’s “AFDM”
(vpage35) setting is “ON”.
z2 This is displayed when the input signal is “DTS-ES Discrete 6.1”.
z3 This is displayed when the input signal is “DTS 96/24”.
Standard playback
GViews on the displayH
qw
q Shows a decoder to be used.
• A DOLBY DIGITAL decoder is displayed as
“DOLBY D”.
• A DOLBY DIGITAL Plus decoder is displayed
as “DOLBY DIGITAL +”.
w Shows a decoder that creates sound output
from the surround back speakers.
For an input signal that can be reproduced in
each surround mode, see “Surround modes and
surround parameters” (vpage44).
1.AVR391E3ENG4th100602.inddSec:221.AVR391E3ENG4th100602.inddSec:22 2010/06/0414:29:242010/06/0414:29:24

Denon AVR-391 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Dolby Formats	Dolby Digital, Dolby Pro Logic II
Audio Return Channel	Yes
Component Video Inputs	2
Digital Optical Inputs	1
Digital Coaxial Inputs	1
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	98 dB
THD	0.08%
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Tuner Bands	AM/FM
Power Output	75 Watts per channel
DTS Formats	DTS
Tuner Frequency Range	FM: 87.5 - 108 MHz
Video Inputs/Outputs	Composite
Audio Inputs/Outputs	Digital Optical
Dimensions	434 x 151 x 319 mm
Weight	8.5 kg