Denon AVR-391 Owner's Manual

39
ENGLISH
Basic version Advanced versionSimple version Information
Front panel
For buttons not explained here, see the page indicated in parentheses ( ).
qw e r yt u i
oQ0Q1Q2Q3Q4
Q5
Q6 Q7 Q8
q Power operation button
(ON/STANDBY) ······································ (6, 10)
Turns power to this unit on and off (standby).
w Power indicator ·········································· (10)
e Headphones jack (PHONES)
When the headphones are plugged into this
jack, audio will no longer be output from the
connected speakers or from the PRE OUT
connectors.
NOTE
To prevent hearing loss, do not raise the volume
level excessively when using headphones.
r QUICK SELECT buttons ····························· (28)
t STANDARD button ························· (21, 22, 35)
y SURROUND MODE buttons ················ (21, 51)
u V.AUX/PORTABLE button ························· (17)
i PORTABLE jack ··········································· (15)
o MASTER VOLUME control knob ··············· (17)
Q0 V.AUX INPUT connectors ·························· (15)
Remove the cap covering the connectors when
you want to use them.
Q1 Master volume indicator
Q2 Display ························································· (39)
Q3 Remote control sensor ······························ (42)
Q4 HDMI INPUT SELECT buttons ··················· (17)
Q5 Input source select buttons ··········· (17, 18, 20)
Q6 RESTORER button ······································ (36)
Q7 DIMMER button ·········································· (34)
Q8 STATUS button ···································· (18, 37)
Part names and functions
Display
u yioQ0Q1Q2Q3
wq e tr
q Decoder indicators
These light when the respective decoders are
operating.
w Input signal indicators
e Information display
The input source name, surround mode, setting
values and other information are displayed here.
r Front speaker indicator
This lights when audio signals are being output
from the speakers.
t QUICK SELECT indicators
The indicator corresponding to the memory
for which Quick Select function is set, lights
(“Quick select function” (vpage28)).
y Master volume indicator
When performing setting operations, displays
the menu number.
u Sleep timer indicator
This lights when the sleep mode is selected
(vpage28).
i MUTE indicator
This lights when the mute mode is selected
(vpage17).
o Surround back indicator
This lights when audio signals are being output
from the surround back speakers (vpage7).
Q0 Input mode indicators
Set the audio input modes for the different input
sources (vpage32).
Q1 RESTORER indicator
This lights when the RESTORER mode is
selected (vpage36).
Q2 HDMI indicator
This lights when playing using HDMI connections.
Q3 Tuner reception mode indicators
These light according to the reception conditions
when the input source is set to “TUNER”.
STEREO: In the FM mode, this lights when
receiving analog stereo broadcasts.
TUNED: This lights when the broadcast is
properly tuned in.
AUTO: This lights when in the auto tuning
mode.
1.AVR391E3ENG4th100602.inddSec:391.AVR391E3ENG4th100602.inddSec:39 2010/06/0414:29:302010/06/0414:29:30

Denon AVR-391 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Dolby Formats	Dolby Digital, Dolby Pro Logic II
Audio Return Channel	Yes
Component Video Inputs	2
Digital Optical Inputs	1
Digital Coaxial Inputs	1
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	98 dB
THD	0.08%
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Tuner Bands	AM/FM
Power Output	75 Watts per channel
DTS Formats	DTS
Tuner Frequency Range	FM: 87.5 - 108 MHz
Video Inputs/Outputs	Composite
Audio Inputs/Outputs	Digital Optical
Dimensions	434 x 151 x 319 mm
Weight	8.5 kg