Denon AVR-391 Owner's Manual

37
ENGLISH
Basic versionSimple version InformationAdvanced version
Information
Information on the main unit’s various settings (Status) and on input
signals (Audio Input Signal) is shown on the display.
The information displayed changes each time you press
STATUS.
The information is displayed for several seconds before the display
returns to its original condition.
GItems to be checkedH
• Input source
• Surround mode
• Input digital terminal
• Input mode
• Decode mode
• Video select
• Dialogue normalization
etc.
NOTE
The information displayed differs according to the input source.
Dialogue normalization function
This function is automatically activated when playing Dolby Digital
sources.
It automatically corrects the standard signal level for individual
program sources.
The correction value can be checked using
STATUS.
The fi gure is the corrected
value. This cannot be
changed.
1.AVR391E3ENG4th100602.inddSec:371.AVR391E3ENG4th100602.inddSec:37 2010/06/0414:29:302010/06/0414:29:30

Denon AVR-391 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Dolby Formats	Dolby Digital, Dolby Pro Logic II
Audio Return Channel	Yes
Component Video Inputs	2
Digital Optical Inputs	1
Digital Coaxial Inputs	1
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	98 dB
THD	0.08%
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Tuner Bands	AM/FM
Power Output	75 Watts per channel
DTS Formats	DTS
Tuner Frequency Range	FM: 87.5 - 108 MHz
Video Inputs/Outputs	Composite
Audio Inputs/Outputs	Digital Optical
Dimensions	434 x 151 x 319 mm
Weight	8.5 kg