Getting Started Settings Playback Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
Connect the Tuner
Connecting Devices
TV
Select the terminal to use and connect the device.
Satellite Receiver / Cable Tuner (Set Top Box)
Select the terminal to use and connect the device.
Satellite Receiver / Cable Tuner
Set this to change the input signal to which the input source is
assigned.
“Input Assign” (vpage 46)
Set as Necessary
TV
Set this to change the input signal to which the input source is
assigned.
“Input Assign” (vpage 46)
Set as Necessary
For instructions on HDMI connections, see “Connecting Devices
Equipped with HDMI Terminals” on page 14.
For instructions on HDMI connections, see “Connecting Devices
Equipped with HDMI Terminals” on page 14.
FM/AM
An FM antenna cable plug can be connected directly.
Direction of broadcasting station
FM antenna
75 Ω/ohms
Coaxial cable
Ground
AM outdoor
antenna
AM loop antenna
(supplied)
FM indoor
antenna
(supplied)
Connections