Denon AVR-4520CI Service Manual

93
Error
Code
Details of Error code Display Coping strategies
A3 No FirmwareFile in USB.
E t h e r I M G * * * m i n
F i l e s N o t F o u n d A 3
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
A4
FirmwareFile in USB for unsupported
Model name/area
E t h e r I M G * * * m i n
N o t M a t c h F i r m A 4
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
A6
Error notication received while
requesting FirmwareInfo.
E t h e r I M G * * * m i n
U p d a t i n g f a i l A 6
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
A7 TimeOut while obtaining Firmware
E t h e r I M G * * * m i n
U p d a t i n g f a i l A 7
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
AE
Unable to detect USB for
FirmwareDownload.
E t h e r I M G * * * m i n
C o n n e c t i o n F a i l A E
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
AF
No FirmwareFile for
FirmwareDownload.
E t h e r I M G * * * m i n
F i l e s N o t F o u n d A F
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
B1
TimeOut in Download (writing to
SDRAM) for FirmwareDownload
E t h e r I M G * * * m i n
C o n n e c t i o n F a i l B 1
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
B2
Error notication received after
rewriting DM860A Firm.
E t h e r I M G * * * m i n
U p d a t i n g f a i l B 2
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
B3 Error in FirmwareUpdate (TimeOut).
E t h e r I M G * * * m i n
U p d a t i n g f a i l B 3
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
B4 Failed to transit to BootLoaderMode.
E t h e r I M G * * * m i n
U p d a t i n g f a i l B 4
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
B5 Failed to transit to ApplicationMode.
E t h e r I M G * * * m i n
U p d a t i n g f a i l B 5
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
--- Cautions on Firmware Update ---
When an error code as shown above appears in the DISPLAY, check the following:
• Check whether the Firmware downloaded to the USB memory is correct (whether the MODEL name and area of the
downloaded Firmware match those for the product, and whether the USB Memory contains data other than the latest
Firmware).
• Update after resetting the product.
• Use a different USB memory.

Denon AVR-4520CI Specifications

General

Brand	Denon
Model	AVR-4520CI
Category	Receiver
Language	English