Denon AVR-4802 Service Manual

8
AVR-4802/AVC-A11SR
Front Chassis
Front Chassis, H/P P.W.B.
(1) Remove 8 screws
18
.
(2) Detach the Front Chassis by pulling upward to release
4 hooks.
(3) Remove 2 screws
19
and snap plate, then detach the
H/P P.W.B.
Hook
18
18
18
Hook
19
19
Snap Plate
H/P P.W.B.

Denon AVR-4802 Specifications

General

Impedance	8 ohms
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
THD	0.05%
Signal-to-Noise Ratio	100 dB
Surround Sound	Dolby Digital, DTS, Dolby Pro Logic II
Component Video Inputs	3
Digital Inputs	5 (3 Optical, 2 Coaxial)
Type	AV Receiver
Channels	7.1
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Inputs	5 Digital (3 Optical, 2 Coaxial)
Outputs	composite video, component video, optical digital
Audio D/A Converter	24-bit/192kHz