62
Checking the preset stations
1
Use the “Auto tuning” or “Manual tuning” operation to tune
in the station to be preset in the memory.
2
Press the MEMORY button.
3
Press the SHIFT button and select
the desired memory block (A to E).
4
Press the CHANNEL + (up) or –
(down) button to select the desired
preset channel (1 to 8).
5
Press the MEMORY button again
to store the station in the preset
memory.
(Remote control unit)
(Remote control unit)
To preset other channels, repeat steps 2 to 5.
A total of 40 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to E.
• The preset (broadcast) stations can be checked on the on screen display.
1
Press the ON SCREEN/DISPLAY button repeatedly until the “Tuner Preset Stations” screen appears
on the OSD.
Preset memory
To Next Page
Loading...
Need help?
General
