58
Tone control setting
• Use the tone control setting to adjust the bass and treble as desired.
• To operate the tone control from the remote control unit.
• The tone control setting only affects the front speakers.
• If the tone control function is used, the main volume cannot be adjusted up to 18 dB. (The maximum main volume level differs in the
different surround modes.)
1
Display the surround parameter
screen on the monitor.
The screen for the selected
surround mode appears.
“TONE” cannot be selected
in the Direct mode.
2
Select “TONE”.
3
Switch to the Tone Control
screen.
Select Tone Defeat OFF.
4
5
Enter the setting.
The surround menu screen re-appears.
6
To end the setting mode, press the surround parameter button again.
To select Bass or Treble. To set the level.
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
To Next Page
Loading...
Need help?
General
