EasyManua.ls Logo

Denon AVR-983

Denon AVR-983
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
75
17
SPECIFICATIONS
2 Audio section
Power amplifier
Rated output: Front: 90 W + 90 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
125 W + 125 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Center: 90 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
125 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Surround: 90 W + 90 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
125 W + 125 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Surround Back: 90 W + 90 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
125 W + 125 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Dynamic power: 120 W x 2 ch (8 /ohms)
170 W x 2 ch (4 /ohms)
200 W x 2 ch (2 /ohms)
Output terminals: Front: A or B 6 ~ 16 /ohms
A + B 8 ~ 16 /ohms
Center, Surround, Surr. Back/Zone 2: 6 ~ 16 /ohms
Analog
Input sensitivity / input impedance: 200 mV / 47 k/kohms
Frequency response: 10 Hz ~ 100 kHz: +0, 3 dB (DIRECT mode)
S/N: 102 dB (DIRECT mode)
Distortion: 0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output: 1.2 V
Digital
D/A output: Rated output 2 V (at 0 dB playback)
Total harmonic distortion 0.008% (1 kHz, at 0 dB)
S/N ratio 102 dB
Dynamic range 96 dB
Digital input: Format Digital audio interface
Phono equalizer (PHONO input REC OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
Signal-to-noise ratio: 74 dB (A weighting, with 5 mV input)
Rated output / Maximum output: 150 mV / 8 V
Distortion factor: 0.03% (1 kHz, 3 V)
2 Video section
Standard video jacks
Input / output level and impedance: 1 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz +0, 3 dB
S-video jacks
Input / output level and impedance: Y signal 1 Vp-p, 75 /ohms
C signal 0.286 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz +0, 3 dB
Color component video jacks
Input / output level and impedance: Y signal 1 Vp-p, 75 /ohms
P
B/CB
signal 0.7 Vp-p, 75 /ohms
P
R/CR
signal 0.7Vp-p, 75 /ohms
Frequency response: DC ~ 100 MHz +0, 3 dB
2 Tuner section
[FM] (note: µV at 75 /ohms, 0 dBf=1 x 10
15
W) [AM]
Receiving Range: 87.50 MHz ~ 107.90 MHz 520 kHz ~ 1710 kHz
Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N (IHF-A): MONO 77 dB
STEREO 72 dB
Total Harmonic Distortion (at 1 kHz): MONO 0.15%
STEREO 0.3%
2 General
Power supply: AC 120 V, 60 Hz
Power consumption: 5.5 A
1 W Max (Standby)
Maximum external dimensions: 434 (W) x 171 (H) x 416 (D) mm (17-3/32 x 6-47/64 x 16-3/8)
Mass: 13.0 kg (28 lbs 11 oz)
2 Remote control unit (RC-924)
Batteries: R6P/AA Type (three batteries)
External dimensions: 58 (W) x 230 (H) x 37 (D) mm (2-9/32 x 9-1/16 x 1-29/64)
Mass: 230 g (Approx. 8 oz) (including batteries)
*
For purposes of improvement, specifications and design are subject to change without notice.

Other manuals for Denon AVR-983

Related product manuals