41
Adjusting the sound field effects
Tone
around items indicate the settings made upon purchase.
Adjust the tonal quality of the sound.
1
Press TONE.
Tone
Tone Control Off
Enter ReturnENTER BACK
2
Use o p to select “On”.
On Allow tone adjustment (bass, treble).
Off
Playback without tone adjustment.
NOTE
The tone cannot be adjusted in the DIRECT mode.
3
Press ui to select an item to be set, and use o p to select a setting value.
Bass Adjust bass.
•–6dB – +6dB (0dB)
Treble Adjust treble.
•–6dB – +6dB (0dB)
“Bass” or “Treble” can be set when the menu “Tone Control” setting is “On”.
NIGHT MODE
around items indicate the settings made upon purchase.
Optimized setting for late-night listening.
•If you do not press any button for approximately 5 seconds, the menu screen light turns off.
Press NIGHT to select your desired mode.
D.Comp:Off
Low Set the adjusted value to “Low”.
Mid Set the adjusted value to “Middle”.
High Set the adjusted value to “High”.
Off
Not set.
When a Dolby TrueHD signal is output, “DRC” is displayed on the TV screen.
The setting mode is also changed as shown below.
Low
Set the adjusted value to “Low”.
Mid
Set the adjusted value to “Middle”.
High
Set the adjusted value to “High”.
Auto
Automatic dynamic range compression on/off control according to the source.
Off
Not set.
To Next Page
Loading...
Need help?
General
