43
Information
Information on the main unit’s various settings (Status) and on input signals (Audio Input Signal) is shown
on the display.
The information displayed changes each time you press STATUS on the main unit.
The information is displayed for several seconds before the display returns to its original condition.
GItems to be checkedH
•Input source
•Surround mode
•Input digital terminal
etc.
Press INFO to display current source name, volume, surround mode name, and
other information at the bottom of the screen.
Information
SOURCE:CBL/SAT
MODE
:MULTI CH STEREO
Master Volume: 0.0
NOTE
The information displayed differs according to the input source.
Dialogue normalization function
This function is automatically activated when playing Dolby Digital sources.
It automatically corrects the standard signal level for individual program sources.
The correction value can be checked using
STATUS on the main unit.
Offset: - 4dB
The figure is the corrected value. This cannot be changed.
To Next Page
Loading...
Need help?
General
