Denon AVR-X2100W User Manual

Web control function
You can control this unit from a web control screen on a web browser.
.
PC
Router
Tablet
This unit
0
This unit and the PC or tablet need to be connected correctly to the network in
order to use the web control function. (
“Connecting to a home network
(LAN)” (v
p. 50))
0
Depending on the settings of your security-related software, you may not be able
to access this unit from your PC. If this is the case, then change the settings of the
security-related software.
Controlling the unit from a web control
1
Switch the “IP Control” setting to “Always On”.
(v
p. 185)
2
Check the IP address of this unit with
“Information” (v p. 181).
.
Network/Information
Friendly name
DHCP
IP Address
MAC Address
Displays the current network settings of the AVR
Denon AVR-X2100W
On
192.168.100.19
Connection Wired (Ethernet)
0005cd-000000
Checking the IP address.
3
Start up the web browser.
Contents Connections Playback Settings Tips Appendix
124
Front panel Display Rear panel Remote Index

Denon AVR-X2100W Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	150 W
Power output per channel (20-20KHz@8 Ohm)	95 W
HDMI in	8
Composite video in	2
Component video (YPbPr/YCbCr) in	1
Speakers connectivity type	-
Ethernet LAN	Yes
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	500 W

Weight and Dimensions

Depth	339 mm
Width	434 mm
Height	167 mm
Weight	9700 g