EasyManuals Logo

Denon AVR-X2100W User Manual

Denon AVR-X2100W
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #208 background imageLoading...
Page #208 background image
o
Sound is interrupted or noise occurs
Symptom Cause / Solution Page
During playback from the
Internet radio or USB
memory device, sound is
occasionally interrupted.
0
When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
0
The network communication speed is slow or the radio station is busy.
When making a call on
iPhone, noise occurs in
audio output on this unit.
0
When making a call, keep a distance of 20 cm or longer between iPhone and this unit.
Noise often occurs in
FM/AM broadcasting.
0
Change the antenna orientation or position.
48
0
Please use an outdoor antenna. 48
0
Separate the antenna from other connection cables. 48
The sounds appear to be
distorted.
0
Lower the volume.
55
0
Set “Off” to the ECO Mode. When “On” or “Auto” is in the ECO Mode, the audio may by distorted when
the playback volume is high.
188
Sound cuts out when using
Wi-Fi connection.
0
If nearby devices cause playback to cut out due to electronic interference, switch to a wired LAN
connection.
50
0
Particularly when you play back large music files, depending on your wireless LAN environment, the
playback sound may be interrupted. In this case, make the wired LAN connection.
182
Contents Connections Playback Settings Tips Appendix
208
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X2100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X2100W and is the answer not in the manual?

Denon AVR-X2100W Specifications

General IconGeneral
Receiver typeSurround
Frequency range10 - 100000 Hz
Audio output channels7.1 channels
Signal-to-Noise Ratio (SNR)100 dB
Power output per channel (1KHz@6 Ohm)150 W
Power output per channel (20-20KHz@8 Ohm)95 W
HDMI in8
Composite video in2
Component video (YPbPr/YCbCr) in1
Speakers connectivity type-
Ethernet LANYes
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Optical drive includedNo
Product colorBlack
Audio decodersDolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD
Apple docking compatibilityiPhone, iPod
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)500 W
Weight and Dimensions IconWeight and Dimensions
Depth339 mm
Width434 mm
Height167 mm
Weight9700 g

Related product manuals