Denon AVR-X2100W User Manual

Setting items Detailed items Description Page
.
Inputs
Input Assign Changes input connector assignment. 159
Source Rename Changes the display name for input source. 161
Hide Sources Removes from the display input sources that are not used. 161
Source Level Adjusts the playback level of the audio input. 161
Input Select Sets the audio input mode and decode mode. 162
.
Speakers
Audyssey
®
Setup
The acoustic characteristics of the connected speakers and listening room are
measured and the optimum settings are made automatically.
163
Manual Setup
Sets up the speakers manually or changes the Audyssey
®
Setup settings.
173
.
Network
Information Displays network information. 181
Connection Selects whether to connect the home network to a wireless LAN or a wired LAN. 181
Settings Used for manually setting the IP address or when using a proxy server. 184
IP Control Enables network communication in standby power mode. 185
Friendly Name The “Friendly Name” is the name of this unit displayed on the network. You can change
the Friendly Name according to your preferences.
186
Diagnostics Used to check the network connection.
186
Maintenance Mode Used when receiving maintenance from a Denon service engineer or custom installer.
This mode is not designed for use by the end user, and should only be used by a trained
service technician or custom installation professional.
187
Contents Connections Playback Settings Tips Appendix
131
Front panel Display Rear panel Remote Index

Denon AVR-X2100W Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	150 W
Power output per channel (20-20KHz@8 Ohm)	95 W
HDMI in	8
Composite video in	2
Component video (YPbPr/YCbCr) in	1
Speakers connectivity type	-
Ethernet LAN	Yes
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	500 W

Weight and Dimensions

Depth	339 mm
Width	434 mm
Height	167 mm
Weight	9700 g